At-fs238b/1 10/100tx To 100fx (sc) Single-mode Fiber (15km) Standalone Rate & Media Converter

Introduction

The AT-FS238 media converter is a 10/100Mbps copper to single-mode fiber media converter which can send and receive on single strand fiber (1310nm TX/1550nm RX) or (1550nm TX/1310nm RX). These units are designed to be used in pairs in a network topology to provide point-to-point access. The AT-FS238 converts 10/100TX (RJ45) to 100FX (SC) and can extend distances up to 40km. Both ports feature full and half-duplex operation. The AT-FS238 is easy to install and does not require software configuration or management.

Features

• Full duplex capability
• Auto-negotiation
• MissingLink
• Auto-uplink (auto MDI/MDI-X)
• Packet filtering
• Smart Missing Link (SML)
• Store and forward 

Specifications

General
Width	10.5 cm
Depth	9.5 cm
Height	2.5 cm
Weight	0.3 kg
Device Type	Media converter
Enclosure Type	External
Expansion / Connectivity
Interfaces	1 x network - Ethernet 100Base-FX - SC single mode female ¦ 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45 female
Networking
Connectivity Technology	Wired
Compliant Standards	IEEE 802.3, IEEE 802.3u
Data Transfer Rate	100 Mbps
Cabling Type	10Base-T, 100Base-FX, 100Base-TX
Status Indicators	Collision status, port transmission speed, port duplex mode, power, link OK, status
MAC Address Table Size	8K entries
Max Transfer Distance	15 km
Optical Wave Length	1550 (TX) / 1310 (RX) nm
Miscellaneous
Compliant Standards	TUV, cUL, EN 60950, EN55024, UL 60950, EN55022 Class B, FCC Part 15 B
Power
Power Device	Power adapter - external
Power Consumption Operational	24 Watt
Environmental Parameters
Min Operating Temperature	0 °C
Max Operating Temperature	40 °C
Humidity Range Operating	5 - 90%